This is a close-up of the mascara brush charm that I made. Using Crayola Magic Model Clay for all the following charms... (The kit I got was 20 dollars for 16 packs of all primaries, black and white, orange, green , and purple.) First, I made the little grip, and poked a large hole through the center of it through the top (not all the way though). Next, I made the stick thing. I rolled out six smaller segments to stick onto the top of the stick to quickly emulate a brush end of a brush. The eye ring was made from a curled staple.
This next charm is a capless lipstick. I made the black holder part first. then, out of red clay, I formed a cylinder with the closest matching circumfrence as best as I could. The gold part was actually made from 2 thin rings of yellow that were later colored gld with a gold Elmer's Painters opaque paint marker (1.75$). the eye ring (plus all of the following charms) will be made from curled staples.
This green apple charm was made with green and white clay. The ratio was like 1:4. I rolled the clay mixture into a ball. Then, I used a dotting tool to poke a little hole (not completely through) on the top and the bottom. Next, I used the pointy end of a cone-shape-tipped pencil to make both apple depressions more realistic and spreaded. The stem was made from brown and white clay, with the ration being 1:5. After the charm "dried" (still very spongy texture), I used the silver Elmer's Journaling pen to make the ring around the apple. I finished the charm by poking a staple-eyelid into the side of the fruit.
For this fruit charm. I used red clay and orange and yellow clay for the fruit part. I first made the easy part- the slice. I made tthe middle part with very thin strands of red. For the peel, (I had to make several attempts) I rolled out a thin piece of red and stuck it on the slice. I trimmed the excess peel part with a knife. I later stuck an eyelid on a side.
This is the first time I make a "glass" charm. I used hot glue to make the semi-clear cup. I first made a flat dot from hot glue and made a spirally pattern up to make the cup's stem. I then made the cup part out of hot glue. I attached the cup part to the stem with a bead of hot glue after both parts dried. Then, I made a spiral-piped ice cream shape with two cinnamon sticks and a bunch of truffles!
And now, for my favorite one...
This was my second charm that put hotglue into consideration. h, in cas you can't tel what this is, it's a clear tube of peach lotion with a silver cap attached on the side. The first thing that I did was I made a kind of bowler hat shaped piece out of black clay. I cylindered a piece and made the top's circumfrence a bit smaller than the bottom's. I used a rounded chopstick to make the opening. When the piece dried, I colored it silver and attached it to the side of the peach lotion tube. The second thing to do is to make the peach lotion. I used orange to white to red (the ratio is 4:10:1) to form the sort of tube shape with the top like a circle and the where the end tapers to a flat point. When it dried, I made a puddle of hotglue on a nonstick craft mat. While it was still hot, I dipped the tapered end of the peach piece in and pulled upward. Pull up only until the hotglue that gets pulled up alongside hints thinning. In other words, you want to have the hot glue on the "tube" end to be the same length and similar thickness. Hold it like in this pulled position until the glue dries. When dried, use a scissor to cut off excess hotglue. For the mouth of the tube, turn off/take out the wire of the hotglue gun. This way, the gun will start to cool and squeeze out less amounts of glue at one time while still being able to squeeze it. Make a flat dot on the circle end of the tube. wait about 20 sec. to dry. Afterwards, make another slightly smaller dot on top of the origninal. Wait 10 sec. Use a flat side of the glue gun to shape the second dot into a lipstickslant shape. Let dry. Insert an eyering and hang on a jutting needle. Apply a thick coat of clear glue over the tube's surface to emulate the look of lotion inside a plastic bottle. I use Elmer's Clear glue. Let dry. If some glue drips off, you can use your fingers to "smooth" it back into place. I had to do this once!
Check back later for more charming updates and projects! Have a creative day, and see everyone next post!
0 comments:
Post a Comment